Supersonic Therapeutic Ozone Generators
Superior Lyme and Candida Support
Increase Hyperbaric Therapy Results!
The made-in-the-USA Supersonic Ozone Generators are ideal for most applications of ozone therapy and comes with the same lifetime warranty, top notch support and quiet production of ultra-pure ozone as the more popular generators but at a better price!
Most of these units sell for much more money. This O3 generator is made by one of the original manufactures so you can’t get a better price anywhere. They previously built or currently build many other brands like Promolife, Oxygen America, and others.
Hyperbaric Central brings this Ozone Production Unit to the market with a very sleek slim line design. It comes in a locking flight case, padded for protection (cases may vary sometimes black sometimes silver). It is either a single or a twin component molecular generator that produces very strong ozone. Up to 80 ug/ml for the single and 160 ug/ml for the dual system when run in parallel. It produces ozone through a Silent Pulse Injection Cold Corona Discharge; A low voltage, cold process that involves very little heat. It uses a regular 110 outlet, but can be used with any voltage as long as you use a transformer.
SUPERSONIC OZONE comes from the original manufacture working with other ozone generator brands for years. This is an easy to use ozone maker, which produces ultra-pure ozone through a number of important features with superior quality controls. The end result was a dual stage ozone generator that exceeded even our expectations.
Purchase the Single Ozone Generator or Dual Ozone Generator for double the output.
Supersonic Ozone Generator is the new generation of low frequency, low wattage ozone generators with stronger output than the competition. Unlike the popular brands, Supersonic offers you flexible output controls so that you can adjust output to your own needs.
Unlike dangerous high voltage glass cell generators, the Supersonic O3 will never burn out, is very quiet and operates cool so the ozone is not destroyed by heat (this provides a more stable ozone output. Glass cells generate a tremendous amount of heat which compromises the quality of ozone.
All components are manufactured in the United States, including the ceramic ozone cells. Because the O3Elite operates at a mere 1.5 amps, ETL and UL approval are not necessary and operation is safer. In fact, the O3Elite is the safest ozone generator available.
Supersonic Ozone Generators are individually tested for ozone output and efficiency in our lab before shipping.
Cold ozone production and stable flow rates.
The Supersonic Ozone Generator runs with either an oxygen concentrator or an oxygen tank (sold separately). It features Cold Ozone Production with no excess heat, and produces stable ozone concentrations at different oxygen flow rates. The concentration won’t diminish over time. Between the settings on the ozone generator and the various flow rates available from your oxygen source, you can create almost any output you want up to 80 ug/ml for the single generator and 160 ug/ml for the dual. We include an easy to read chart showing how to get the precise gamma level you desire. When oxygen comes into the unit, the ozonator transforms it from two molecules (O2) to three (O3). After a short period of time the third molecule breaks off and does the work in ozone therapy.
Cold Ozone Technology with ceramic cells creates stronger, more efficient ozone production with minimum voltage input. Because the cells are so efficient they produce next to no noise. Machines with glass cells can create a lot of noise and heat, making them far less than ideal for ozone therapy.
What you get with the Supersonic Ozone Generator
The O3Elite comes standard with the following: five feet of silicone tubing, five feet of oxygen tubing, instruction manual, ug/ml gamma chart, power adapter, ozone resistant check valve, Luer lock caps, wall mounts and a lifetime warranty. We have a vast array of accessories you can choose to enhance your options. Both inlet and outlet hose barb fittings will take a 3/16″ silicone hose. The hose can be adapted easily to your Luer lock fittings and can be easily adapted to the oxygen source of your choice.
Features of the WPS-400 Ozone Generator:
Ø Cold Corona Discharge – a low voltage, cold process. No cooling fan is required. Unit has no moving parts. Generator is affordable, compact, portable and very easy to operate.
Ø Built for continuous, efficient operation in harsh environments.
Ø Dual phase electrical short circuit protection.
Ø Long trouble-free life from solid state power supply module, transformer and dielectric cell.
Ø Low Frequency, will comply with the most stringent government radio frequency standards.
Ø No overheating of dielectric cell and power components.
Ø Non-leaking glass quartz tube discharge dielectric reactor cell.
Ø Output range selector variable switch.
Ø Ozone resistant fittings and silicone tubing.
Ø Stable ozone concentration levels.
Ø #316 Surgical Stainless and Quartz Reactor Chamber
Ø No cooling fan necessary
Ø UL and CSA recognized components.
Ø Convenient carry case
Ø Set up instructions.
Ø Made in the USA.
Ø Comes complete with power cord, and silicon hose.
Ø Lifetime on unit, lifetime warranty on the reactor chamber.
- Electrical: 120 Volts AC.
- Amps: 1.5
- Frequency: 50/60 Hz.
- Power: 16 Watts.
- Construction: Crush resistant carry case.
- Quartz, Ceramic, Stainless Steel cell
- Feed Gas: Oxygen.
- Fuse Size: 1 Amp 250 volt.
- Oxygen feed required
- 1 or 2 switches, 1 or 2 ozone controls – each chamber can be operated individually
- Gamma output: approximately 100 (for dual ozone generator)
- Gamma chart comes with each unit when requested.
- Size: 4″ Height x 11.5″ Width x 9″ Depth.
- Weight: 4.5 lbs.
Legal Disclaimer: Information provided is for informational purposes only and is not a substitute for professional medical advice. No health claims for these products have been evaluated by the United States Food and Drug Administration (FDA), nor has the FDA approved these products to diagnose, cure, or prevent disease. Since every individual is unique, we highly recommend you consult with your licensed health care practitioner about the use of ozone products in your particular situation.
Single Generator Product Description
The WPS-100 ozone generator is superior in quality, performance, reliability, and workmanship to all others on the market. It is built to last for years without any maintenance. This machine has a unique quartz glass cold corona tube that does not come in contact with metal and will not generate a significant amount of heat. Unit comes with all hoses needed to connect to oxygen as well as the water diffuser/stone. It also comes in a lightweight aluminum case for protection.
- The WPS-100 includes one ozone chamber (for isotopes such as o8, o12, o13, etc). The chamber currently has its own on/off switch and regulator.
- It will produce up to 80 ug/ml output. It produces ozone by a Silent Pulse Injection Cold Corona Discharge.
- The WPS-100 ozone generator is fed by an oxygen source, either an oxygen tank or oxygen concentrator (sold separately).
- It uses a regular 110 outlet.
- USA made
- We suggest you purchase the WPS-400 for multiple uses. However, if you can’t afford it then the WPS-100 works as great.
Dual Generator Product Description
The WPS-400 ozone generator is superior in quality, performance, reliability, and workmanship to all others on the market. It is built to last for years without any maintenance. This machine has a unique quartz glass cold corona tube that does not come in contact with metal and will not generate a significant amount of heat. Unit comes with all hoses needed to connect to oxygen as well as the water diffuser/stone. It also comes in a lightweight aluminum case for protection.
- The wps-400 consists of two ozone chambers that can be used independently (for lower ozone levels) or together (for higher levels of isotopes such as o8, o12, o13, etc). Each chamber has its own on/off switch and regulator.
- The WPS-400 ozone generator is fed by an oxygen source, either by an oxygen tank or oxygen concentrator (sold separately).
- The front control panel includes a variable control selector switch for each individual chamber that allows for an unlimited number of output settings. There are two inlet and two outlet hose barb fittings which will take a 3/16″ silicone hose.
- It uses a regular 110 outlet and comes with ozone resistant silicon outlet hoses.
- USA made.
- Output charts
Ozone Insufflation Add-On
This package includes everything you need for ozone insufflations and ozonated water.
- O3Elite Single or Dual Ozone Generator with tubing and connectors
- Bag of varied Luer Locks
- Water Stone Bubbler to infuse ozone into water
- 2 – 6ml Syringes
- 10 Catheters
- 2 – 200mL Insufflation Bags
- OPTIONAL: ADDITIONAL MEDICAL STETHOSCOPE FOR EAR INSUFFLATION